Embedded Aluminum Led Road Stud for Road C1
Load Bearing: >20T(static)
Warranty: 18 Months
Body material: Heavy-duty casting aluminum
Power supply: The solar panel(monocrystalline 2.5V/0.2W)
Visual distance: ＞ 800m
Working Mode: Flashing or Constant
Waterproof: IP68
Aluminum Led Road Studs light Features:
•Up to 800 meters of visibility.
•Reliable all night, all-year-round performance.
•Totally sustainable harnessing free solar energy.
•Used where street lighting is either unavailable, Led Road Stud not cost-effective or environmentally impossible.
•Cost-effective, Led Road Studs are easy to install and require absolutely no wires or maintenance.
•Solar-powered road studs self-contained surface mounted.
•Solar studs for road accept OEM/ODM
Led Road Studs for road Parameters:
| Material: | Heavy-duty casting aluminum |
| Power supply: | The solar panel(monocrystalline 2.5V/0.2W) |
| Battery: | NI-MH 1.2V/800MAH or lithium battery |
| Working model: | Blinking or Constant Charging at daytime and working automatically at night |
| LED: | 3pcs per side, total 6 pcs |
| LED colors: | Yellow, White, Red, Green, Blue |
| Life span: | 3 years |
| Resistance: | >20T(static) |
| Size: | 120*50mm(bottom) 4.72″*1.97″(bottom) 135*50mm(upper) 5.31″*1.97″(upper) |
| Visual distance: | >800M |
| Water poof: | IP68 |
| Carton Size: | 24pcs/ctn; weight: 17kgs; Carton size: 43*25*28CM/57*41*23.5CM 24pcs/ctn; weight: 37.48bs; Carton size: 16.92″*9.84″*11.02″/22.44*16.14″*9.25″ |
Application of Aluminum Led Road Studs C1:
♥Schools and hospitals
♥Highways
♥High traffic areas
♥Walking paths
♥Transit stations
♥Parks and campuses
♥Urban Road
Installation Method Of Embedded Aluminum Led Road Stud C1:
1. Carefully mark the distance between the placement of Led Road Studs. To prevent an adverse effect on the ground, use a proper tool such as Core Drill. Drill Φ120mm and depth will be 50mm.
2. Remove all debris from the installation hole.
3. Pour epoxy into the holes per the manufacturer’s instruction.
4. Verity that the installation hole is straight. Verify that the installation hole is large enough to allow the epoxy to surround the Led Road Stud shaft.
5. Set the lighting surface of the Led Road Stud to the desired viewing angle. Verify the epoxy is evenly adhering to the installation hole and Led Road Stud shaft.
6. After curing the Led Road Stud for 6-8 hours, remove the installation of the isolation facility.
-
Aluminum Led Road Studs With Shank R1 -
Hot Sale Led Road Studs With Cheap Price D3 -
Highway Aluminum Led Road Studs For Sale D1 -
PC Round Led Road Stud for Garden B1 -
Heavy Duty Led Road Studs For Highways C2 -
Plastic Led Road Studs For Bike Path or Park F1 -
Aluminum Led Road Studs Light Pavement Marker C3 -
Hot Sale Led Road Studs with Reflectors D2 -
Embedded Aluminum Led Road Stud for Road C1
-
360 Degree Plastic Led Road Stud Embedded Type B2 -
RUICHEN Led Road Stud for Dock or Deck A1 -
High Quality Led Road Stud Light for Sale M1 -
Aluminum Reflective Led Road Stud Marker 102 -
ABS Cat Eyes Led Road Stud For Sale 103 -
Plastic Led Road Stud Pavement Marker For Motorway 116 -
Plastic Reflective Led Road Stud 100-2 -
Amber Reflective Led Road Stud For Motorway 100-1 -
Solar Powered Flashing Crosswalk Sign -
Flashing Solar Pedestrian Crossing Sign -
LED Solar Flashing Stop Signs -
Illuminated Solar Speed Limit Sign -
Solar LED Chevron Flashing Sign -
Solar LED School Crossing and Solar Crosswalk Sign -
Thermoplastic Road Line Marking Machine RC-TRM-2 -
Thermoplastic Road Marking Machine RC-TRM-1 -
Plunger Pump Road Painting Machine RC-CRM-3 -
Diaphragm Pump Road Line Marking Machine RC-CRM-2.3 -
Diaphragm Pump Road Line Marking Machine RC-CRM-2.1 -
Diaphragm Pump Road Painting Machine RC-CRM-2.1