ABS Cat Eyes Led Road Stud For Sale 103

Body Material: ABS
Size: 103*80*18mm (4.06″*3.15″*0.71″)
Filling: Epoxy+Quartz sand
Lens Material: PMMA

Email: info@rctraffic.com

Send Inquiry

Online Chat

Product Details

Cat Eyes Led Road Stud Features:

•Reflective Led Road Studs water, oil, chemical, and heat resistance.

•Reflective Led Road Studs can work more than 3 years normally.

•Very high reflectivity.

•Reflective Led Road Studs easy installation with glues.

•Photometric values:exceeds 600(mcd/lux).

Cat Eyes Led Road Stud Parameters:

Body material:	ABS
Filling:	Epoxy+Quartz Sand
Lens Material:	PMMA
Reflector type:	Double side/Single side
Quality:	ASTM D4280 & EN1463-1 standard
Size:	1038018mm (4.06″3.15″0.71″)
Packing:	45.52522cm,100pcs/ctn (17.91″9.84″8.66″,100pcs/ctn )
Weight:	93g/pc; 10kg/ctn (0.21bs/pc; 22.05bs/ctn )

Installation Method Of Cat Eyes Led Road Stud:

1. Determine the installation location and distance, clean the road surface, and ensure that the Led Road Studs are installed on a flat road surface.
2. Clean the bottom of the Led Road Studs and apply the epoxy glue evenly to the back of the studs.
3. Press the side with the glue on the road, fix the position, wait for the glue to dry.
4. Check within 2 hours of installation to ensure that all Led Road Studs are not installed incorrectly and are not bent or deformed due to compression.
5. Remove the installation isolation facility within 6-8 hours after the installation of the Led Road Studs.

Related Products